Victoria 6 Free For (Very) Limited Time

Greetings fellow 3D enthusiasts! Some cool news out of the DAZ camp for you all today. In celebration of her first birthday this weekend (11:59 PM MST Sunday June 29th, 2014) you can pick up Victoria 6 for free. For those new to the latest generation of Genesis figures, you will have to download the Genesis 2 Female base figure (also free). The Genesis 2 base figures, female and male, are both available for download direct from your “Product Library” at DAZ 3D and via the DAZ Install Manager (DIM).

There are a lot of DAZ Studio and Poser users out there that have yet to dip their feet into the Genesis 2 pool, even as far as installing the base G2 figures, let alone grabbing either the latest Victoria and Michael incarnations. Can we hope to see a similar offer for Michael 6? Let’s hope. So, if you haven’t yet picked up the figure the time is now. Pass the word along.

The birthday giveaway announcement forum thread

This is why we needed Genesis 2

Michael 6 3d figure rigged jaw showing weight maps.Well actually I’m lying. I think. As far as I know Genesis could have shipped with a properly weight mapped and rigged jaw. Was it a bridge to far at the time? Why not add it as an update post release? In any case a rigged and weighted jaw is one example of G2’s greater articulation. This means we have more control over Victoria 6 and Michale 6 when it comes to crafting expressions and creating other effects, such as taking a fist to the jaw in a bar room brawl.

Other key points of articulation are due to weight map improvements, weighted and rigged toes, and the splitting of the male/female figures has allowed for gendered weight maps. This means breasts are weighted much better, where as with G1 the chest had to be weighted to suit both genders. The improvements are quite obvious when doing comparisons.

Below is a 5 min DIY to see if I could get Genesis’s jaw moving by  by doing a little elementary weight painting.

on a whim

Pure horror. Why did Genesis never have a rigged and weighted jaw?

Yes, I’m still working on the review. As you can see I’ve become distracted somewhat with examining finer details and learning more about the software, involved technologies – building myself into a better, stronger, faster 3D nerd.

DAZ3D’s Genesis 2 and Victoria 6 Review

Looking for Victoria 7 review?
Also
Michael 6/Genesis 2 M review

Genesis 2 ProDAZ3D’s regenesis or devolution?

After much speculation since the first hint of Genesis 2 and Victoria 6 on the 13th of June the release has finally happened. Users are just as divided between the excited, neutral and angry camps as it was during the week long silent build up. Well played DAZ3D. They knew the product would be controversial, as just about everything they do seems to be, and the effect was they didn’t have to do a shred of promotion other than dropping a clanger in the store and springing an image rich, detail deficit teaser thread on their PC forum. Word spread fast and speculation ran at fevered pitch.

So, in the light of a new day as the dust begins to settle all those questions have been laid to rest. Genesis 2 comes as two base meshes; Genesis 2 Female (released), and Genesis 2 Male (presumably – yet to be released). While Victoria 6 is a purchase item the base mesh is available for free (Genesis 2 Female Starter Essentials) and can be downloaded via the DAZ 3D Install Manager or via the site from the Product Library.

For many, the move to separate male and female meshes is a backwards step. Genesis was about flexibility and universal morphing. The argument put forward for the split is that this allows for greater levels of gender specific detail that weren’t possible in a unisex mesh. I think this is a reasonable compromise. Future characters such as The Girl 5 and Freak 6 can be made from a mesh specifically designed for their gender, and we won’t have to worry about a hundred thousand fit/morph packs to put that sexy cyber suit for V6 on Aiko 6. Also, this should improve the quality of outfits as vendors will be free to make more gender specific mesh details. For those who see a universal mesh as the absolute end of 3D figure design there is hope.

Victoria 6 for Genesis 2GenX update in the works

Dimension3D intends to update his popular plugin GenX for use with Genesis 2. For those not familiar with the plugin, it allows for the conversion of morphs from previous figures to work with Genesis. Dimension3D had this to say: “I can’t give details or a release date this time, but I’m planning to add morph transfer from Genesis 1 to Genesis 2 and vice versa as well as direct transfer from generation 3 and generation 4 figures to Genesis 2.”

Genesis is going to be able to access morphs for Genesis 2? This will undoubtedly make a lot of G1 diehards very happy, and all at the same time create a work-around for G 2’s inability to mix male and female morphs. Well, undoubtedly a male morph could be created for G2 Female but being able to bring G1’s flexibility to G2 will be very useful and save time and money for those situations where close enough is good enough. Of course I could be reading too much in to this, but it sounds like Dimension3D is gearing up to effectively merge Genesis 1 and Genesis 2 while bridging the gap between G2 Female and male.

Until such a day as we are graced with an updated GenX there are other approaches to consider. Some users have already created male characters by mixing various morphs – see pg. 35 of the Genesis 2 preview thread.

Auto-Fit

Out of the box Genesis 2 has auto-fit capabilities for Genesis content, but a separate product (Victoria 4 for Genesis 2 Female) needs to be purchased to fit V4 clothing and textures. This has been one point in particular that has caused angst among users whether, as of yet, they have bought in or not. Presumably fits for other popular figures will be added as additional purchases, as they were with G1. The up-shot here is that, according to promo material, the V4 to G2 conversion is better than the standard V4 to G1 conversion. One significant leap here is with the fitting of V4 based shoes, particularly those with high heels. The standard G1 conversions absolutely butchered footwear, so this will undoubtedly be an important improvement for those of us who are looking for a quick and easy way fit.

V4 to Genesis 2 Auto-fit workaround

Genesis 2 victoria 4 auto-fit workaround

Genesis 2 victoria 4 auto-fit workaround

If that still isn’t enough to entice everyone then there is a work around. Load Genesis > auto-fit desired apparel > save as support asset > figure/prop asset > clear scene > load G2 > find and load the items just saved > auto-fit as usual

The fit won’t be perfect and will likely require a smoothing modifier to cover good ol’ fashion poke.

Genesis 2 Poser Compatibility

poser dson test

Genesis 2 in Poser via DSON

DSON is still the only easy way to get a poseable Genesis 2 into Poser, which is undoubtedly no surprise to anyone, but still disappointing none the less. This comes with all the boons and dooms of the past Genesis/DSON deal, such as the slowdown experienced while using Genesis/DSON content in Poser Pro 2012/9. Thankfully there is an easy fix for this which a surprising number of users still don’t know about. Simply turn subdivision off in the Scripts > DSON Support menu. In any case working with Genesis in Poser is still a slower process than working with other figures such as the Gen 4 DAZ3D figures. This could be a very different experience for Poser Pro 2014/10 with the advances made since the 2012/9 releases, such as the support for the subdivision methods utilised by Genesis 2. I can’t test the theory, but will update this as soon as I find out.

Compatibility with older DAZ Studio versions

Genesis 2 uses the newer .DUF file format and other new technologies such as weight maps, and as such is not compatible with versions of pre 4.5 versions outside an exported .obj, but this means using current versions of DS anyway.

G2 is compatible to the fullest extent only with DS 4.6x, but will work just fine in 4.5 versions (so I hear) but without the new surface/materials. Luckily it comes with legacy materials, so should be fine but might need a little tweaking.

The experience for most people updating from DS 4.5 to 4.6 has mostly been positive, but there has been some report of issues. OS users seem to have got a better deal with this update than has been the case with previous DS updates. With the new advances in DS since 4.5 it is certainly worth testing out, and since 4 or 3X the progress has been huge – not least of which include significant 3Delight upgrades.

Value for money bundles?

Without a doubt the bundles look pretty good. You get some very nice hair props and texture sets (one comes with the basic V6 product) with the Victoria 6 Starter Bundle, and the outfits, one fantasy and the other, a party dress offer a nice bit of diversity and will likely find use with a lot of users. The Pose sets are always useful when you want to do a quick render or if you want to do something more significant and need some inspiration.

The Victoria 6 Pro Bundle is the same again X2!  The quality of the products is of the same or similar quality and will find use in a wide variety of situations. The included outfits are not my cup-o tea, but there might be some texture magic I can pull for my own tastes – something sci-fi!  The hair props and included textures sets are great with lots of mat varieties. Love the fashion hair – everyone loves a bob! Who’s with me? Oh I forgot to mention, the pro bundle has the genitals (must remember the genitals *note*). The texture sets are by well-known and adored artists such as Silver and Countess (yay for tattoos).

No maps!

no maps

Victoria 6 on left with default textures, and Genesis 2 with Bree textures on right. Maps make a difference!

…but where are the Sub Surface Scattering maps? Unless I’m missing something none of the four included texture sets have SSS maps! There are SSS settings, one of them comes with three… but maps? What is maps? Eh, no one on the forums seems to mind this too much, which has me kind of puzzled. If I could just chuck a V5 map in there with my V6 ones I wouldn’t be so confused or disturbed, but we can’t. Maybe this is just me being some kind of SSS lunatic? People seem to be more concerned with a slight fluctuation in the percentage of the sale price.  Of course a little tweaking can fix up a bright red over powered SSS, but you will only get the fine subtlety and control with proper texture maps (so maybe I should just go make one!).

Genesis is the prize

For me the real value of the package comes in the base Genesis 2 figure, and for those of us who can’t sculpt/morph their way out of a wet paper bag, the Victoria 6 morph. The greater level of detail in the geometry is fantastic. The extra detail in the joints as they bend looks a lot more realistic, and all for the cost of a mere 2000 extra polygons. New weight maps and greater articulation in the jaw, ears, breasts, joints etc gives greater realism when posing.

I think Genesis 2 represents quality over quantity, but with the current discounts on the bundles you certainly get both. DAZ probably could have mitigated a good deal of angst by working out a deal to get the V4 morphs into the starter or pro bundle, especially as many Genesis users take it for granted (and why shouldn’t we?). While we’re talking about morphs again I think adding the morph bundle to the pro product would have been a nice touch, but DAZ have certainly been a shrewd with their content/sales strategy this time around. The lack of morphability at this point in the base G2 product feels very un-Genesisish, but if you’re willing to spend the money you can get a very good product. In any case, I look forward to seeing how the figure develops and what the content creators cook up for us.


DAZ3D’s Genesis 2 And Victoria 6: Bringing An Early Sunset to Generation 5?

Looking for a Full Genesis 2 and Victoria 6 review?

Genesis 2: rumour to reality

Rumours of Genesis 2 have been bouncing around since December of 2012, just a year after the release of Victoria 5. Whether the quote from a 3D World promotion was correct at the time or not is not known. It prophesised the emergence of the sixth generation of figures and characters for 2013, which to many seems absurdly soon considering Genesis was only released at the end of 2011. Considering Victoria 4 and her gen 4 counterparts ran rampant for more than half a decade before the birth of Genesis, a two-year reign does seem on the short side.

The subject was quite for just over six months until the release of Gwen Hair, on the 13th of June, once again exploded the cat in the bag (that’s how the saying goes, right?). In the included features it lists Genesis 2 and Victoria 6. Whether this was an intentional slight or not is debatable, but since then several other products have come out with similar support, with the release of one character product (FW Candace) designed specifically for Genesis 2 being promptly removed.

A Member’s Club (PC) only Genesis 2/Victoria 6 preview thread (which I can’t directly link to for some reason) was created on the 11th of June but not made public till the 14th. The thread features renders by various DAZ published artists depicting Genesis 2, Victoria 6, and other related characters and products. Examining the images does yield some information about what we can expect. Character mesh appear to be more detailed, and flexing joints are more realistic. There is no other concrete information, but judging by the wording of some of the promo material and comments by some of the vendors has led to speculation that Genesis 2 characters will not share a common mesh. Whether Gen 6 products will be backwards compatible with Genesis is not known, and many are wondering if this indicates a return to the days of buying matching his and hers morph sets and the like.

I would love nothing more than to spruce up this thread with some fresh Gen 6 images, but alas the images posted on the member’s forum have yet to leak onto Google in any serious or obvious way. I feel compelled to play by the rules here, but in any case it should only be a matter of a day or two before we can expect a full press release and/or product release.

Generation 6 splits community

Sentiment and opinions are split between those are looking forward to seeing new advancements, those that are wary, and those that are out-and-out pessimistic. With Genesis being supported primarily by DAZ 3D, and only a very small pool of content creators selling on other stores working with the figure, the days of fresh Genesis content could be short indeed. Generation 4 figures, on the other hand, have remained popular with vendors servicing the other big DAZ/Poser stores like Renderosity and Runtime DNA.

Why?

Why exactly DAZ has decided to release Genesis 2 just two and a half years after Genesis is a head scratcher, but for it to gain a slice of the market, let alone own it, there would have to be some serious advances in technology. One suggestion is that it could be Poser compatible to a greater and more flexible extent than is currently possible with Genesis’s DSON plugin for Poser. Certainly since Poser’s adoption of Pixar’s OpenSubdiv, which was included in the last DS point release, this removes one obstacle. Of course, the two programs still work with two different weight mapping solutions… Specific inclusion of OpenSubdiv’s power into Genesis could be another reason for the release, but alone seems unlikely to generate a huge amount of interest.

Whatever the reasons DAZ has decided to spring this rather unexpectedly early Gen 6 on the community, some are already chalking this one up as another DAZ PR disaster, but only time will tell.

See our Full Genesis 2 and Victoria 6 review